Installation is very simple, you just locate your sat nav dvd drive, Remove old disc (if you have one) and then insert the new 2015 disc into the drive, the update is. POI Loader is free software for your computer that lets you upload customized points of interest (POIs) to your compatible Garmin device*. I have a 2007 Freelander 2 running on 2006 Sat Nav discs: Land Rover Part No. Current software v0785; New software v0A90. Why it keeps trying to install with.

• Halfords Ireland
• Garmin Sat Nav

Official Land Rover navigation maps store Drive with confidence knowing you have the latest map update for your Land Rover in-car navigation device. With the latest map, you'll know that the ‘shortest route’ or the ‘quickest route’ functions are as reliable as possible.

Save time, enjoy the journey Roads are constantly changing – which is why our maps are too. With the latest Land Rover map update powering your navigation device, you’re on the right road. Updated maps enable the best navigation experience through the best routes, a reliable detour, the closest petrol station, the nearest hospital, restaurants, and more. Get to where you need to be on time and without hassle; get the latest navigation device updates for your Land Rover.

I’ve wanted the Becker satnav for the Freelander for ages. When one came along at the right price I decided to go for it. The install is quite involved as the main head unit to speakers loom has to be replaced. There is also an extra ECU for the steering wheel controls. Parts required: – Item Part Number/ Description Notes Becker Traffic Pro 4765 The nav unit itself. HARNESS-LINK, BECKER, WITH AMPLIFIER, WITH CD AUTO CHANGER, REMOTE ICE, NAVIGATIONAL SYSTEM YMQ001520 I decided to go with the loom that has the Harman Kardon amplifier with it. I haven’t got the amplifier yet but I had a plan to get around that This was purchased from INTERFACE UNIT-REMOTE CONTROL YWQ100031L This is required as the Becker unit cannot read the steering wheel resistor ladder directly like the standard unit.

The ECU reads the steering wheel controls and converts them to I-Bus messages which the Becker unit can understand. These are quite pricey and can be bought from, and. I got mine off eBay for £10!

It’s badged as a Rover unit but it still works. AMPLIFIER AUDIO POWER, HARMON KARDON XQK100300 XQK100301 XQK100300 has been superseded by XQK100301. This unit is extremely expensive at around £400 from I’m going to look for one of these at the shows this year so for now I’ve bridged out the amplifier connections. See below for more details. PICTURE TO BE ADDED LATER BRACKET-AMPLIFIER MOUNTING XQU100980 Hoping that the amplifier will come with this bracket. However if it doesn’t, it can be bought from Installation First of all the old stereo (Phillips C42) had to be removed.

This was followed by taking out the centre console. Then the old head unit to speaker loom was removed and the new one put in its place.

Unclipping the red locating pin was quite difficult but the new one went in quite easily. The old loom can be seen in the background. I didn’t take the old loom out and just tucked it behind console. This will make it easier to put the old stereo back if I decide to sell the Freelander. The steering wheel control was mounted using some sticky back velcro.

I haven’t got the correct bracket and can’t seem to find any part numbers for it. Note the spira-wrap around the amplifier wiring to give it a bit more abrasion resistance. I also put some neoprene tape under where the cable goes over a ridge. Finally all back together! Unfortunately as I had no amplifier there wasn’t any sound coming out of the speakers.

Halfords Ireland

After much studying of RAVE I worked out that I could bridge out the amplifier connections to get the sound through. This is just temporary until I can get the amplifier.

Garmin Sat Nav

Following this the sound came through ok. The sound is much better than the old C42. It seems fuller and more detailed. It should sound amazing when it does get an amplifier!

Useful Documents (Registration required) For further information, take a look at the excellent article on. Coming soon – Connecting a iPod in place of the CD player. Hi, I’m thinking of installing one of these in my Disco and found your article useful.

Also found some useful information on an eBay auction. I’ve pasted it in here for you: – If you do not already have this unit fitted you will need the following parts – Discovery 11 ————— XUI000070 – Aerial – 90.00 pounds YWQ100031L – Module – 75.99 pounds XUD000020 – Cable – 45.00 pounds YWU000050 – Bracket for Module – 3.58 pounds Freelander ———— XUC000030 – Aerial Base- 46.00 pounds YUJ000020 – Aerial – 44.87 pounds YWQ100031L – Module – 75.99 pounds YMQ001530 – Cable – 89.86 npounds YWU000050 – Bracket for Module – 3.58 pounds Thanks for the info.

Love the site. Downloads. 4720 Becker Traffic Pro Installation Guide (643.7 KiB, 131 hits) You do not have permission to download this file. Freelander Nav System Description (376.9 KiB, 98 hits) You do not have permission to download this file. Freelander ICE Wiring (489.7 KiB, 91 hits) You do not have permission to download this file. STC53069 Navigation Installation (5.0 MiB, 88 hits) You do not have permission to download this file. Freelander 2 Roof Rail Fitting Instructions (LR006608 & LR00.

(476.8 KiB, 63 hits) You do not have permission to download this file. Popular Posts.